Upgrade your Samsung OMNIA by Vista
Upgrade your Samsung OMNIA by Vista
ترقية جهاز الامونيا من خلال نظام ويندوز فيستا
ترقية جهاز الامونيا من خلال نظام ويندوز فيستا
تعليمات للترقية:
الخطوة
تعليمات للترقية:
الخطوة
Windows Mobile Device Center
من هنا
الخطوة 2 : تثبيت Samsung modem driver من هناخطوة 3 : قم بتوصيل هاتفك إلى جهاز الكمبيوتر عن طريق كابل سامسونج المحمول.
الخطوة 4 : استخدام النسخ الاحتياطي بياناتك ActiveSync.
الخطوة 5 : تثبيت سامسونج OMNIA [الروم المطلوبه) ، و استكمل خطوات عملية التثبيت.
((((((((التفصيل)))))))
لمعرفة اصدار الروم الخاصه بك
تحذيرات:
- التحديث سوف يمسح جميع البيانات الموجوده على جهازك Omnia تأكد من عمل نسخ احتياطي لأرقامك وملفاتك المهمه.
- الغرض من التحديث هو تطوير كفائة عمل الجهاز وتطوير في بعض التطبيقات واضافة او حذف اخرى.
- تأكد من ان الجوال غير متصل بشبكة الجوال او قم باخراج الشريحه لكي لا يعيقك اي اتصال وارد او رساله مع التأكد من ان بطارية الجوال مشحونه بنسبة لا تقل عن 70% .
- لا تقم باغلاق الجهاز (الجوال) او (الكمبيوتر) واذا كنت تستخدم لابتوب تأكد من وضع البطارية لتفادي فصل الكهرباء المفاجئ.
المتطلبات:
نظام وندوز فيستا ، لابد من وجود Windows Mobile Device Center، توصيل الحهاز من خلال كيبل USB.
________________________________________ __________
تأكد من ان البطارية مشحونه
________________________________________ __________
كابل بيانات USB ، تطبيق الترقية المطلوبه
________________________________________ __________
كيف يتم الاجراء؟
الطريقه هي كالتالي:
1.Install Window Mobile Device Center
Download the installation program.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Download the proper version for your language and start the installation.
2.Connect Window Mobile Device Center and backup necessary data
Connect to the PC by using the given USB data cable.
(It is recommended to connect directly to the PC rather than via USB hub.)
If connection fails, please try again after closing PC firewall or Anti-Virus programs.
Please make sure to keep Windows Mobile Device Center connected after finishing data backup.
Please connect to Windows Mobile Device Center even when a backup of data is not necessary.
3.Upgrade Caution
- During the upgrade, all the data stored on the device will be lost. Please check again.
- The upgrade process should not be interrupted. It is recommended to close all other programs running on the PC.
- Please follow the instruction of the website to download the proper version of the program.
- Execute the downloaded program.
- The window as shown below will be displayed.
If you do not find any problems after reading cautions, please read and tick off the check boxes in order.
- Download starts. Wait until the download is complete.
- Download is complete and the device will be reset. Now, you
may remove the USB cable and close the application.
Possible error during the upgrade اخطاء محتملة اثناء الترقية
If Windows Mobile Device
Center is disconnected, the window as shown above will be displayed and you cannot tick off the check box. In this case, please have Windows Mobile Device Center connected. After completing ticking off the check boxes, press Verify device.
A window as shown above will be displayed when the software version of the device to be upgraded is not correct. Please check the version again and connect the right device.
A window as shown above will be displayed when the battery runs out of power. Please charge the battery and try again.
A window as shown above will be displayed when the device is identified. Pressing OK button will reset the device, and the update installation will start automatically.
If the download process fails like the screen below and the device cannot be booted to connect to PC via ActiveSync, please run the User Upgrade again to enter the ‘emergency mode.’
As Shown above,
emergency mode checkbox will appear when you execute the User Upgrade after the download failure.
Check the
emergency mode checkbox and popup message like the screen above will appear. Please press OK and manually turn on the device. Make sure the device is connected to the PC via USB cable when you turn on the device.
The upgrade process
will progress automatically like a normal upgrade process. If upgrade process doesn’t start, please try to remove/insert the battery and turn on the device again.
الخطوة 2 : تثبيت Samsung modem driver من هناخطوة 3 : قم بتوصيل هاتفك إلى جهاز الكمبيوتر عن طريق كابل سامسونج المحمول.
الخطوة 4 : استخدام النسخ الاحتياطي بياناتك ActiveSync.
الخطوة 5 : تثبيت سامسونج OMNIA [الروم المطلوبه) ، و استكمل خطوات عملية التثبيت.
((((((((التفصيل)))))))
لمعرفة اصدار الروم الخاصه بك
تحذيرات:
- التحديث سوف يمسح جميع البيانات الموجوده على جهازك Omnia تأكد من عمل نسخ احتياطي لأرقامك وملفاتك المهمه.
- الغرض من التحديث هو تطوير كفائة عمل الجهاز وتطوير في بعض التطبيقات واضافة او حذف اخرى.
- تأكد من ان الجوال غير متصل بشبكة الجوال او قم باخراج الشريحه لكي لا يعيقك اي اتصال وارد او رساله مع التأكد من ان بطارية الجوال مشحونه بنسبة لا تقل عن 70% .
- لا تقم باغلاق الجهاز (الجوال) او (الكمبيوتر) واذا كنت تستخدم لابتوب تأكد من وضع البطارية لتفادي فصل الكهرباء المفاجئ.
المتطلبات:
نظام وندوز فيستا ، لابد من وجود Windows Mobile Device Center، توصيل الحهاز من خلال كيبل USB.________________________________________ __________
تأكد من ان البطارية مشحونه________________________________________ __________
كابل بيانات USB ، تطبيق الترقية المطلوبه________________________________________ __________
كيف يتم الاجراء؟
الطريقه هي كالتالي:
1.Install Window Mobile Device Center
Download the installation program.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Download the proper version for your language and start the installation.
2.Connect Window Mobile Device Center and backup necessary data
Connect to the PC by using the given USB data cable.
(It is recommended to connect directly to the PC rather than via USB hub.)
If connection fails, please try again after closing PC firewall or Anti-Virus programs.
Please make sure to keep Windows Mobile Device Center connected after finishing data backup.
Please connect to Windows Mobile Device Center even when a backup of data is not necessary.
3.Upgrade Caution
- During the upgrade, all the data stored on the device will be lost. Please check again.
- The upgrade process should not be interrupted. It is recommended to close all other programs running on the PC.
- Please follow the instruction of the website to download the proper version of the program.
- Execute the downloaded program.
- The window as shown below will be displayed.
If you do not find any problems after reading cautions, please read and tick off the check boxes in order.
- Download starts. Wait until the download is complete.
- Download is complete and the device will be reset. Now, you
may remove the USB cable and close the application.
Possible error during the upgrade اخطاء محتملة اثناء الترقية
If Windows Mobile Device
Center is disconnected, the window as shown above will be displayed and you cannot tick off the check box. In this case, please have Windows Mobile Device Center connected. After completing ticking off the check boxes, press Verify device.
A window as shown above will be displayed when the software version of the device to be upgraded is not correct. Please check the version again and connect the right device.
A window as shown above will be displayed when the battery runs out of power. Please charge the battery and try again.
A window as shown above will be displayed when the device is identified. Pressing OK button will reset the device, and the update installation will start automatically.
If the download process fails like the screen below and the device cannot be booted to connect to PC via ActiveSync, please run the User Upgrade again to enter the ‘emergency mode.’
As Shown above,
emergency mode checkbox will appear when you execute the User Upgrade after the download failure.
Check the
emergency mode checkbox and popup message like the screen above will appear. Please press OK and manually turn on the device. Make sure the device is connected to the PC via USB cable when you turn on the device.
The upgrade process
will progress automatically like a normal upgrade process. If upgrade process doesn’t start, please try to remove/insert the battery and turn on the device again.
Comments
Post a Comment